華為交換機Nestream原始流配置

1）配置GE2/0/6、2/0/7 接口的NetStream采樣功能，采樣比為5000

[SwitchA] interface gigabitethernet 2/0/6
[SwitchA-GigabitEthernet1/0/6] ip netstream sampler fix-packets 5000 inbound
[SwitchA-GigabitEthernet1/0/6] ip netstream sampler fix-packets 5000 outbound
[SwitchA-GigabitEthernet1/0/6] quit
[SwitchA] interface gigabitethernet 2/0/7
[SwitchA-GigabitEthernet1/0/7] ip netstream sampler fix-packets 5000 inbound
[SwitchA-GigabitEthernet1/0/7] ip netstream sampler fix-packets 5000 outbound
[SwitchA-GigabitEthernet1/0/7] quit
2）配置不活躍流的老化時間為100秒，以及開啟由TCP連接的FIN和RST報文觸發(fā)老化

[SwitchA] ip netstream timeout active 200

[SwitchA] ip netstream tcp-flag enable

3）配置NetStream原始流統(tǒng)計信息輸出報文源地址為 106.3.4.30，目的地址為218.206.100.100，目的端口號為50040
[SwitchA] ip netstream export source 106.3.4.30
[SwitchA] ip netstream export host 218.206.100.100 50040
4）配置輸出報文版本為V5。
[SwitchA] ip netstream export version 5
5）使能GE2/0/6、2/0/7出、入接口的NetStream統(tǒng)計功能
[SwitchA] interface gigabitethernet 2/0/6
[SwitchA-GigabitEthernet2/0/6] ip netstream inbound
[SwitchA-GigabitEthernet2/0/6] ip netstream outbound
[SwitchA-GigabitEthernet2/0/6] quit
[SwitchA] interface gigabitethernet 2/0/7
[SwitchA-GigabitEthernet2/0/7] ip netstream inbound

[SwitchA-GigabitEthernet2/0/7] ip netstream outbound

配置舉例: